Interface | Description |
---|---|
MapViewRenderer | |
OnInitializeListener |
Class | Description |
---|---|
Address |
Simple address for geocode request.
|
BaseSearchResults<T extends com.ptvag.navigation.sdk.NativeObject> | |
BuddyAlertState |
Holds the state of all buddy alerts.
|
BuildConfig | |
CalculateTourResult | |
Color | |
CrossingView |
Describes the type of street crossing at a manover.
|
ErrorResultHandler |
Class for mapping of internal integral error codes to enumeration
values of
SDKErrorCode . |
GeoCodeResult |
Encapsulates the result of the SDKSimpleGeoCode()-Call.
|
GeoPosition |
Specifies a real-world position in format
CoordinateSystem.GEODEZ . *
Note that the latitude and longitude values are muliplied by the
NavigationSDK.SDK_GEOCONVERSION_FACTOR . |
GlobalMapInformation |
Information about all installed maps.
|
GLRenderer | |
GPSData |
Contains information received from a real GPS receiver, data which is generated
by parsing an externally provided NMEA data stream or by parsing a recorded GPS track.
|
GPSManager |
This class is the key to reception of GPS data in the PTV Navigation SDK.
|
HttpURLConnectionImpl | |
LorryOptions |
Options for calculation of routes which respect lorry specific
route restrictions.
|
ManeuverDescription |
Description of a maneuver point.
|
ManeuverGeneratorSettings | |
MapInformation |
Information about a specific map.
|
MapInformationResults | |
MapView |
This is the class for rendering maps and showing them on the screen.
|
MapView.HalfResolutionFactors | |
MapViewStyles | |
MatchedWayPoint |
Specifies a real-world MatchedWayPoint in Mercator format.
|
MatchedWayPointArray |
Specifies an object, the guarantees, that the native
C++-MatchedWayPoints are lying in memory in following spaces.
|
MissRouting |
Not implemented.
|
NativeArray<T extends com.ptvag.navigation.sdk.NativeObject> | |
NavigationInformation |
Contains the status of the navigation.
|
NavigationSDK |
Declarations of the native JNI-interfaces of the NavigationSDK-interfaces.
|
NavigationSettings |
General options for the navigation
Those options adjust the behavior of the navigation, i.e. the output
of
NavigationSDK.getGuidanceInformation(GPSData) . |
NMEAParser | |
Observer | |
OpalRenderer | |
ParseTownNameResult |
Capsules the result of the SDKParseTownName()-Call.
|
POISearchFilter | |
POISearchRequest |
Search request structure definition.
|
POISearchResult |
POI search result *
Result of a POI search.
|
POISearchResults | |
POIWarnerInfo | |
Position |
Specifies a real-world position in Mercator format.
|
PositionArray |
Specifies an object, the guarantees, that the native
C++-Positions are lying in memory in following spaces.
|
R | |
Result<T extends com.ptvag.navigation.sdk.NativeObject> | |
RoadMatchInformation |
Holds return values of SDKMatchRoad
This datastructure stores all information that is provided by a call of SDKMatchRoad
including the exact mercator coordinates of the matched position on the road.
|
RouteInformation |
Contains the status of the navigation.
|
RouteOptions |
Options for routing.
|
RouteTraces | |
SDKJobQueue | |
SDKManeuverTextID |
Created by zim on 05.08.2016.
|
SDKVersion | |
SearchRequest |
Search request for most geocoding APIS
(including SDKSearchTown(), SDKSearchPostcode(), SDKSearchStreet(),
SDKSearchHouseNr())
|
SearchResult |
Search result for most geocoding APIs (including
NavigationSDK.searchTown(SearchRequest, int, boolean) ,
NavigationSDK.searchPostcode(SearchRequest, int, boolean, boolean) ,
NavigationSDK.searchStreet(SearchRequest, int, SearchResult) and
NavigationSDK.searchHouseNr(SearchRequest, int, SearchResult, SearchResult) . |
SearchResults | |
SignPostInfo | |
StringRetriever | |
SVPWayPoint |
Specifies a waypoint the user defines as input to an svp
route request in Mercator format
|
SVPWayPointArray |
Specifies an object, the guarantees, that the native
C++-SVPWaypoints are lying in memory in following spaces.
|
TargetDescription |
Details about navigation targets supplied via SDKLoadRoute()
|
TextureShader | |
TollInformation |
Toll and ecotaxe information.
|
Tour | |
Trace |
Holds the trace of a route.
|
TraceColor |
Trace color information information.
|
TraceExt |
Holds the trace of a route.
|
TrafficResults | |
TrafficSearchResult |
Specifies a real-world position in Mercator format.
|
TruckWarnings |
Warnings (not only) for truck drivers.
|
WayPoint |
Specifies a real-world WayPoint in Mercator format.
|
WayPointArray |
Specifies an object, the guarantees, that the native
C++-WayPoints are lying in memory in following spaces.
|
Enum | Description |
---|---|
BuddyAlertType |
Created by gima on 21.12.2016.
|
CoordinateSystem |
Enumeration of the coordinate formats used and supported by the NavigationSDK.
|
CountryCodeFormat | |
CrossingViewMode |
This enumeration describes the different types of street crossings
at a manover point.
|
GuidanceKind |
An enumeration of various guidance kinds, extending the classical
turn-by-turn scheme.
|
JunctionType | |
ManeuverArrow | |
ManeuverDirection |
Enumeration for the different manoeuvre directions.
|
ManeuverType |
Enumeration for the different manoeuvre types.
|
ManeuverWeight |
Enumeration for the different manoeuvre weights.
|
MapView.MapMarkerStyle | |
NavigationSDK.UnitCategory | |
POISearchKind |
Enumeration for the different kinds of POI search.
|
ReRouteMode |
ReRouting status modes.
|
ReRouteStrategyMode |
Enumeration for the different kinds of rerouting strategies
|
RouteCalculationType | |
RoutingVehicleType | |
SDKErrorCode | |
SearchKind | |
TrafficSearchResult.SimplifiedCategory |
Exception | Description |
---|---|
CalculateTourException |
General exception class for all types of runtime exceptions from the PTV navigation SDK.
|
NavigationException |
General exception class for all types of exceptions from the PTV navigation SDK.
|
NavigationRuntimeException |
General exception class for all types of runtime exceptions from the PTV navigation SDK.
|