Routing Structures

Data Structures
struct	SDK_LorryOptions
struct	SDK_RouteOptions

Typedefs
typedef SDK_UINT1	SDK_SpeedTable [15]

Detailed Description

Structures used to configure the routing options.

Typedef Documentation

typedef SDK_UINT1 SDK_SpeedTable[15]

Speed table (routing profile)

An array containing a speed table for road types, i.e. velocities [km/h] which are used for calculation of the route.

• SDKSpeedTable[0] - Speed for fast motorway.
• SDKSpeedTable[1] - Speed for medium motorway.
• SDKSpeedTable[2] - Speed for slow motorway (for M&G-City-Maps: Speed for very fast national road).
• SDKSpeedTable[3] - Speed for fast national road.
• SDKSpeedTable[4] - Speed for medium national road.
• SDKSpeedTable[5] - NOT Speed for slow national road. Instead this speed has a special sense. It is the speed for segments leading on motorway or comparable roads called ramps. It's value shoulde be (like intuitivley filled) between SDKSpeedTable [4] and [6].
• SDKSpeedTable[6] - Speed for fast country road.
• SDKSpeedTable[7] - Speed for medium country road.
• SDKSpeedTable[8] - Speed for slow country road.
• SDKSpeedTable[9] - Speed for fast urban road.
• SDKSpeedTable[10] - Speed for medium urban road.
• SDKSpeedTable[11] - Speed for slow urban road.
• SDKSpeedTable[12] - Speed for Ferry If the value is 0 the ferry is not used. If ferries are to be used then the value 1 should be entered.
• SDKSpeedTable[13] - (reserved for internal use)
• SDKSpeedTable[14] - Speed for access roads.